FUS PLATE
FusPlate is a standard plate product of UACJ that provides an upgraded quality (JIS standard A5052). (Alloy/material A5052-H112)
UACJ standard aluminum alloy plate
FusPlate
FusPlate is a standard plate product of UACJ
that provides an upgraded quality (JIS standard A5052).
(Alloy/material A5052-H112)
Characteristics
-
Tolerance of sheet thickness between 1/3 and 1/5 of JIS.
-
Residual stress and flatness that are better than general heavy plates
-
Reduced warpage during cutting and cutting through reduced residual stress
-
Cost reduction through elimination of the machining process and warpage correction process
-
Surface protection film attached
-
Thickness range from 4 mm to 100 mm
Aluminum plate specialized factory
UACJ Fukaya Works
FusPlate is manufactured by Fukaya Works, which is specialized in heavy plates.
We satisfy customer needs by manufacturing high-quality aluminum plates with excellent thickness tolerance and flatness using the latest equipment and superior manufacturing technology.
Manufacturing size Unit : mm
| Plate thickness | Width x length |
|---|---|
| 4～100 |
1,000 × 2,000 1,250 × 2,500 1,525 × 3,050 |
Mechanical properties (Representative values)
| Plate thickness (mm) | Tensile strength (N/mm2) |
Elongation (%) |
|---|---|---|
| 4 ~ 13 | 216 | 25 |
| 14 ~ 100 | 209 | 27 |
Chemical composition Unit : Wt/%
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | etc. | AI | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Individual | Sum | ||||||||||
| 5052 | 0.25 Below | 0.40 Below | 0.10 Below | 0.10 Below | 2.2~2.8 | 0.15～0.35 | 0.10 Below | - | 0.05 Below | 0.15 Below | etc. |
Thickness tolerance Unit : mm
| Plate thickness | 4 | 5 | 6 | 7 ~ 12 | 13 ~ 15 | 16 ~ 17 | 18 ~ 19 | 20 ~ 21 |
|---|---|---|---|---|---|---|---|---|
| Tolerance | ±0.06 | ±0.07 | ±0.08 | ±0.10 | ±0.15 | ±0.16 | ±0.18 | ±0.20 |
| Plate thickness | 22 | 23 ~ 27 | 28 ~ 35 | 36 ~ 49 | 50 ~ 54 | 55 ~ 64 | 65 ~ 74 | 75 ~ 100 |
|---|---|---|---|---|---|---|---|---|
| Tolerance | ±0.22 | ±0.25 | ±0.30 | ±0.40 | ±0.50 | ±0.60 | ±0.65 | ±0.85 |
Flatness Unit : mm
| Plate thickness | 4 ~ 30 | 31 ~ 50 | 51 ~ 100 |
|---|---|---|---|
| Flatness | 0.2 Below / 1,000(Width·length) | 0.3 Below / 1,000(Width·length) | 1.2 Below / 1,000(Width·length) |
Rolled material
We provide a maximum production width of 4,100mm or more, and supply products used in various fields such as shipbuilding, aviation, railroad, automobile, and construction as well as semiconductor and display equipment.
SLAB
The material for the products with a thickness that is difficult to produce with rolled materials and with the thickness of 640mm or less can be cut and supplied to the desired thickness.
(Material : A5052-F, A5083-F / Maximum slab production width : 2,600mm)
